HP 5920 Series Fundamentals Configuration Guide

92
To display the running configuration, use the display current-configuration command. The displayed
configuration does not include parameters that use initial settings.
Startup configuration loading process
Figure 28 shows the configuration loading process during startup.
Figure 28 Configuration loading process during startup
The device uses the following process to select the startup configuration file to load at startup:
1. If you access the Boot menu to select the Skip Current System Configuration option, the device
starts up with empty configuration. All parameters use their initial settings.
2. If you do not access the Boot menu to select the Skip Current System Configuration option, the
following process applies:
a. If you have specified a main startup configuration file, and this configuration file is available,
the device starts up with this startup configuration file.
b. If you have not specified a main startup configuration file, or the specified main startup
configuration file is not available, the device searches for the backup startup configuration file.
Start
Enter Boot menu?
Boot ROM runs
Yes
Main
configuration file
available?
No
Yes
Software runs with
settings in main
file
End
Software runs with
factory defaults
Load main
configuration file
Load factory
defaults
Select "Skip
Current System
Configuration"
No
Yes
Software runs with
settings in backup
file
Load backup
configuration file
Backup
configuration file
available?
No
Software runs with
initial settings
Load initial
settings

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English