HP 5920 Series Fundamentals Configuration Guide

69
<Switch>?
User view commands:
ping Ping function
quit Exit from current command view
ssh2 Establish a secure shell client connection
super Switch to a user role
system-view Enter the System View
telnet Establish a telnet connection
tracert Tracert function
<Switch>
2. Obtain the level-3 user role:
# Use the super password to obtain the level-3 user role. When the system prompts for a username
and password, enter the username test@bbb and password enabpass.
<Switch> super level-3
Username: test@bbb
Password:
The following output shows that you have obtained the level-3 user role.
User privilege role is level-3, and only those commands that authorized to the role
can be used.
# If the ACS server does not respond, enter the local authentication password 654321 at the
prompt.
Invalid configuration or no response from the authentication server.
Change authentication mode to local.
Password:
User privilege role is level-3, and only those commands that authorized to the role
can be used.
The output shows that you have obtained the level-3 user role.
Troubleshooting RBAC
This section describes several typical RBAC problems and their solutions.
Local users have more access permissions than intended
Symptom
A local user can use more commands than should be permitted by the assigned user roles.
Analysis
The local user might have been assigned to user roles without your knowledge. For example, the local
user is automatically assigned a default user role when you create it.
Solution
To resolve the problem:
1. Use the display local-user command to examine the local user accounts for undesirable user roles,
and delete them.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English