37
Displaying and maintaining CLI login
Execute display commands in any view and the other commands in user view.
Task Command
Remarks
Display online CLI user
information.
display users [ all ] N/A
Display user line
information.
display line [ num1 | { aux | vty }
num2 ] [ summary ]
N/A
Display the source IPv4
address or interface
configured for the device
to use for outgoing Telnet
packets when serving as a
Telnet client.
display telnet client N/A
Release a user line. free line { num1 | { aux | vty } num2 }
Multiple users can log in to the device to
simultaneously configure the device.
When necessary, you can execute this
command to release some connections.
You cannot use this command to release
the connection you are using.
Lock the current user line. lock
By default, the system does not lock any
user line.
This command is not supported in FIPS
mode.
Send messages to user
lines.
send { all | num1 | { aux | vty }
num2 }
Use this command in user view.
To Next Page
Loading...
Need help?
General
