HP 5920 Series Fundamentals Configuration Guide

100
• The file is corrupt or not fully compatible with the device.
If both the main and backup next-startup configuration files are deleted, the device uses factory defaults
at the next startup.
To delete a file that is set as both main and backup next-startup configuration files, you must execute both
the reset saved-configuration backup command and the reset saved-configuration main command.
Using only one of the commands removes the specified file attribute instead of deleting the file.
For example, if the reset saved-configuration backup command is executed, the backup next-startup
configuration file setting is set to NULL, but the file is still used as the main file. To delete the file, you must
also execute the reset saved-configuration main command.
Perform the following task in user view:
Task Command Remarks
Delete next-startup configuration
files.
reset saved-configuration [ backup |
main ]
If neither backup nor main is
specified, this command deletes
the main next-startup
configuration file.
Displaying and maintaining configuration files
Execute display commands in any view.
Task Command
Display information about configuration
rollback.
display archive configuration
Display the running configuration.
display current-configuration [ configuration [ module-name ]
| interface [ interface-type [ interface-number ] ] ]
Display the configuration differences between
the current startup configuration file and the
next-startup configuration file.
display current-configuration diff
Display the factory defaults. display default-configuration
Display the configuration differences between
two configuration files.
• display diff configfile file-name-s { configfile file-name-d |
current-configuration | startup-configuration }
• display diff current-configuration { configfile file-name-d |
startup-configuration }
• display diff startup-configuration { configfile file-name-d |
current-configuration }
Display the contents of the configuration file for
the next system startup.
display saved-configuration
Display the valid configuration in the current
view.
display this
Display the names of the configuration files for
this startup and the next startup.
display startup
The display current-configuration diff and display diff commands are available in Release 2311P04 and
later versions.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English