140
Ste
Command
Remarks
4. Set the daylight saving time.
clock summer-time name start-time
start-date end-time end-date
add-time
By default, daylight saving time is
disabled.
Enabling displaying the copyright statement
After you enable displaying the copyright statement, the device displays the copyright statement in the
following situations:
• When a Telnet or SSH user logs in.
• When a console or modem dial-in user quits user view. This is because the device automatically
tries to restart the user session.
The following is a sample copyright statement:
******************************************************************************
* Copyright (c) 2004-2015 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
To enable displaying the copyright statement:
Ste
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable displaying the
copyright statement.
copyright-info enable By default, this function is enabled.
Configuring banners
Banners are messages that the system displays when a user logs in.
Banner types
The system supports the following banners:
• Legal banner—Appears after the copyright. To continue login, the user must enter Y or press Enter.
To quit the process, the user must enter N. Y and N are case insensitive.
• Message of the Day (MOTD) banner—Appears after the legal banner and before the login banner.
Login banner—Appears only when password or scheme authentication is configured.
• Incoming banner—Appears for Modem users.
• Shell banner—Appears for non-Modem users.
Banner input modes
You can configure a single-line banner or a multi-line banner:
To Next Page
Loading...
Need help?
General
