HP 5920 Series Fundamentals Configuration Guide

21
Ste
p
Command Remarks
3. Disable
authentication.
authentication-mode none
By default, authentication is disabled for the
AUX line.
4. Assign a user
role.
user-role role-name
By default, an AUX line user is assigned the
user role network-admin.
The next time you attempt to log in through the console port, you do not need to provide any username
or password.
Configuring password authentication for console login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter AUX line view or
class view.
• To enter AUX line view:
line aux first-number
[ last-number ]
• To enter AUX line class view:
line class aux
Use either command.
A setting in user line view is applied
only to the user line. A setting in user
line class view is applied to all user
lines of the class.
A non-default setting in either view
takes precedence over a default
setting in the other view. A
non-default setting in user line view
takes precedence over a non-default
setting in user line class view.
A setting in user line view takes effect
immediately and affects the online
user. A setting in user line class view
does not affect online users and takes
effect only for users who log in after
the configuration is completed.
3. Enable password
authentication.
authentication-mode password
By default, authentication is disabled
for the AUX line.
4. Set a password.
set authentication password { hash |
simple } password
By default, no password is set.
5. Assign a user role.
user-role role-name
By default, an AUX line user is
assigned the user role
network-admin.
The next time you attempt to log in through the console port, you must provide the configured login
password.
Configuring scheme authentication for console login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English