HP 5920 Series

107
# Use TFTP to download the image file startup-r2310.ipe from the TFTP server to the root directory of the
flash on the master device.
<Sysname> tftp 2.2.2.2 get startup-r2310.ipe
# Back up the image file to startup-r2310-backup.ipe. Skip this step if the flash does not have sufficient
space.
<Sysname> copy startup-r2310.ipe startup-r2310_backup.ipe
# Specify startup-r2310.ipe as the main startup image file for all IRF member devices.
<Sysname> boot-loader file flash:/startup-r2310.ipe slot 1 main
<Sysname> boot-loader file flash:/startup-r2310.ipe slot 2 main
# Specify startup-r2310-backup.ipe as the backup startup image file for all IRF member devices.
<Sysname> boot-loader file flash:/startup-r2310-backup.ipe slot 1 backup
<Sysname> boot-loader file flash:/startup-r2310-backup.ipe slot 2 backup
# Verify the startup image settings.
<Sysname> display boot-loader
# Reboot the device to complete the upgrade.
<Sysname> reboot
Verifying the configuration
# Verify that the device is running the correct software.
<Sysname> display version