HP 5920 Series Fundamentals Configuration Guide

138
Managing the device
This chapter describes how to monitor the operating status of the device, configure the running
parameters (such as the device name, system time, and the temperature alarm thresholds), and reboot
the device.
You can perform the configuration tasks in this chapter in any order.
Device management task list
Tasks at a
g
lance
(Required.) Configuring the device name
(Required.) Configuring the system time
(Optional.) Enabling displaying the copyright statement
(Optional.) Configuring banners
(Required.) Setting the system operating mode
(Optional.) Rebooting the device
(Optional.) Scheduling a task
(Optional.) Disabling password recovery capability
(Optional.) Configuring the preferred airflow direction
(Optional.) Setting the port status detection timer
(Optional.) Configuring CPU usage monitoring
(Required.) Setting memory thresholds
(Required.) Configuring the temperature alarm thresholds
(Optional.) Disabling all USB interfaces
(Required.) Verifying and diagnosing transceiver modules
(Optional.) Restoring the factory-default settings and states
Configuring the device name
A device name, or "hostname," identifies a device in a network and is used as the user view prompt at
the CLI. For example, if the device name is Sysname, the user view prompt is <Sysname>.
To configure the device name:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the device name.
sysname sysname The default device name is HP.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English