HP 5920 Series

80
# Download the file temp.bin from the PC to the Flash root directory of the master device.
ftp> get temp.bin
227 Entering Passive Mode (10.1.1.1,17,5)
150 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\temp.bin" file ready to s
end (53 bytes) in IMAGE / Binary mode
226 Transfer finished successfully.
23951480 bytes received in 95.399 seconds (251.0 kbyte/s)
# Download the file temp.bin from the PC to the Flash root directory of the subordinate member (with
member ID of 2).
ftp> get temp.bin slot2#flash:/temp.bin
# Set the transfer mode to ASCII and upload the configuration file config.cfg from the IRF fabric to the PC
for backup.
ftp> ascii
200 TYPE is now ASCII
ftp> put config.cfg back-config.cfg
227 Entering Passive Mode (10.1.1.1,17,29)
150 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\back-config.cfg " file ready to re
ceive in ASCII mode
226 Transfer finished successfully.
3494 bytes sent in 5.646 seconds (618.00 kbyte/s)
ftp> bye
221-Goodbye. You uploaded 2 and downloaded 2 kbytes.
221 Logout.
<Sysname>