260
9 Parts
Vacuum system
Vacuum system
This section lists replacement parts available for the vacuum system. It includes:
clamps, O-rings and seals, foreline pump and related components, diffusion pump
vacuum system components, and turbomolecular pump vacuum system
components.
Table 12 O-rings and seals
Description HP part number
Calibration valve O-ring (1/4-inch) 0905-1217
Diffusion pump baffle adapter O-ring 0905-1443
End plate O-ring (for front and rear end plates) 0905-1441
GC/MSD interface O-ring 0905-1405
HED feedthrough G1099-80012
HED feedthrough O-ring 0905-0490
KF10/16 seal (foreline pump inlet, oil trap, and diffusion pump outlet) 0905-1463
KF25 O-ring assembly (turbo pump outlet) 0100-1551
KF50 seal (diffusion pump inlet) 0100-1884
Side plate O-ring 0905-1442
Triode gauge tube O-ring 0905-1070
Turbo pump seal
1
0100-1879
Vent valve O-ring (1/4-inch) 0905-1217
1 The turbo pump and its seal are not user-replaceable parts. Refer
service to your Hewlett-Packard service representative.
To Next Page
