FINAL TRIM SIZE : 7.0 in x 8.5 in
A
1.
Before you start:
1.
Shut down the op erating system.
2.
Turn
o
the workstation.
3.
Remove all cables connected to the system mo dule.
2.
Use a at-tipp ed screwdriv
er, unscrew the system mo dule captiv
e screws
in each handle ab out 5 turns (or un
til each screw p ops out to its captiv
e
position).
3.
Pull the system mo dule out of the workstation and place it on a
static-free surface.
DRAFT
2/5/97 11:31
Installing Additional Memory A-5
To Next Page
Loading...
