HP 9000 Series - Page 18

FINAL TRIM SIZE : 7.0 in x 8.5 in
1
Error-Checking and Correcting (ECC) RAM memory is congurable as
follows:
Series 700i/50: 16 to 128 MB main memory:
installable as pairs consisting of 8, 16, or 32 MB RAM boards.
Series 700i/100: 16 to 256 MB main memory:
installable as pairs consisting of 8, 16, 32, or 64 MB RAM boards.
(See \Memory Upgrades" belo
w, for details).
External Caching:
Series 700i/50: 64 Kbyte instruction cache and 64 Kbyte data cache.
Series 700i/100: 256 Kbyte instruction cache and 256 Kbyte data cache.
Three mass storage bays for hard disk, 3.5-in. exible disk, CD R
OM, and
DDS (\DAT") drives. Variable congurations, include the following:
One 3.5-in. xed disk and the following alternativ
es:
Two additional 3.5-in. xed or removable devices or
One 3.5-in. and one 5.25-in (CD ROM) device.
Front or rear access to removable media can b e changed optionally.
Front access is the default for the 745i/50 or 745i/100
Rear access is the default for the 747i/50 or 747i/100.
Input/Output:
RS-232-C (2).
LAN
AUI
SCSI-II SE
HP Parallel.
HP-IB (instrument only).
Voice quality audio I/O.
Standard interfaces.
Rack-mount packages.
Internal speaker on b oard.
1-4 Product Description DRAFT
2/5/97 11:31