EasyManua.ls Logo

HP 9000 Series - Physical Dimensions and Power Requirements

HP 9000 Series
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FINAL TRIM SIZE : 7.0 in x 8.5 in
1
Physical Dimensions and Power Requirements
Height: 176.75 mm. (6.97 in.) (Mo del 745i/50 and 745i/100); 310.15 mm.
(12.2 in.) (Mo del 747i/50 and 747i/100).
Width: 425.45 mm. (16.75 in.) (all mo dels).
Depth: 412.6 mm. (16.2 in.) (all mo dels).
Weight: 18.6 Kg. (4l lb.) (Mo del 745i/50 and 745i/100); 29 Kg. (64.1 lb.)
(Mo del 747i/50 and 747i/100).
Power
Mo del 745i/50 or 745i/100: 350 w
atts maximum.
Mo del 747i/50 or 747i/100: 700 w
atts maximum.
Line select: 90-130 volts or 180-250 volts, auto ranging.
Audio I/O
All mo dels feature 8 Khz voice quality audio with 128 Byte I/O channel
buering. The audio I/O is as follows:
Output connector (1/8 in.) for external speak
er or headphones.
Input connector (1/8 in.) for microphone or other audio source.
These interfaces allowyou to use a microphone to digitize speec
h-quality,
provide single-channel audio for voice annotation, and use applications
for voice-mail and voice recognition. HP-UX provides software control
for recording audio les on hard disk driv
es.
Note however that audio CD
ROMs cannot output directly to the audio-out connector.
See \Using Audio
Input/Output" in Chapter 4 for an overview of audio access with these
workstations.
DRAFT
2/5/97 11:31
Product Description 1-9

Table of Contents

Other manuals for HP 9000 Series

Related product manuals