Computer Setup—File
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 6-1 Computer Setup—File
Option Description
System Information Lists:
●
Product name
●
Manufacturer
●
SKU number
●
Processor type/speed/stepping
●
Installed memory size/speed, number of channels (single or dual) (if applicable)
●
Integrated MAC address for embedded, enabled NIC (if applicable)
●
Chassis serial number
●
Asset tracking number
●
System Board ID
●
System Board CT Number
About Displays copyright notice.
Set Time and Date Allows you to set system time and date.
Flash System ROM Allows you to update the system ROM with a BIOS image file located on removable media or on a
network.
Replicated Setup Save to Removable Storage Device
Saves system configuration to a formatted USB flash media device.
Restore from Removable Storage Device
Restores system configuration from a USB flash media device.
Default Setup Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Apply Defaults and Exit Applies the currently selected default settings and clears any established passwords.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup.
ENWW Computer Setup (F10) Utilities 95
To Next Page
Loading...
