EasyManuals Logo

HP EliteOne 705 G1 User Manual

HP EliteOne 705 G1
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 6-4 Computer Setup—Power
Option Description
OS Power Management
Runtime Power Management— Enable/Disable. Allows certain operating systems to reduce
processor voltage and frequency when the current software load does not require the full
capabilities of the processor. Default is enabled.
Idle Power Savings—Extended/Normal. Allows certain operating systems to decrease the
processors power consumption when the processor is idle. Default is extended.
Unique Sleep State Blink Rates—Enable/Disable. This feature is designed to provide a visual
indication of what sleep state the system is in. Each sleep state has a unique blink pattern. Default
is disabled.
NOTE: For Windows 8 systems with Fast Boot support, a normal shutdown goes to the S4 state,
not the S5 state.
S0 (On) = Solid white LED.
S3 (Stand By)= 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (white LED)
— repeated cycles of 3 blinks and a pause.
S4 (Hibernation)= 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (white
LED) — repeated cycles of 4 blinks and a pause.
S5 (Soft Off) = LED is off.
ACPI S3 PS2 Mouse Wake Up—Enable/Disable. Enables or disables waking from S3 due to any PS2
mouse activity or a button click only.
USB Wake on Device Insertion—Enable/Disable. Allows system to wake from Standby on USB device
insertion.
Hardware Power
Management
SATA Power Management – Enables or disables SATA bus and/or device power management. Default is
enabled.
S5 Maximum Power Savings – Turns off power to all nonessential hardware when system is off to meet
EUP Lot 6 requirement of less than 0.5 Watt power usage. Default is disabled.
Thermal Fan idle mode—This bar graph controls the minimum permitted fan speed.
NOTE: This setting only changes the minimum fan speed. The fans are still automatically controlled.
102 Chapter 6 Computer Setup (F10) Utility ENWW

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteOne 705 G1 and is the answer not in the manual?

HP EliteOne 705 G1 Specifications

General IconGeneral
BrandHP
ModelEliteOne 705 G1
CategoryDesktop
LanguageEnglish

Related product manuals