Table 6-5 Computer Setup—Advanced (for advanced users) (continued)
Onboard Devices Allows you to set resources for or disable Legacy devices.
Select the Legacy device's IRQ, DMA, and I/O Range. The settings may not take effect for all operating
systems. To hide a device from the operating system, see Security > Device Security.
Bus Options Allows you to enable or disable:
●
PCI SERR# Generation. Default is enabled.
●
PCI VGA Palette Snooping, which sets the VGA palette snooping bit in PCI configuration space; only
needed when more than one graphics controller is installed. Default is disabled.
Device Options Allows you to set:
●
Num Lock State at Power-On (off/on). Default is off.
●
Integrated Video (enable/disable). Use this option to disable the integrated video controller when
another video controller is present in the system. Default is enabled.
●
LVDS Panel Select (Auto-select, LG, Samsung). Use this option to select the display panel
manufacturer. When you change the LVDS setting to the installed panel type, the BIOS reprograms
the EDID with the correct data. You must set the panel before the Auto-select setting functions
correctly.
●
Integrated Video. Use this option to manage graphics memory allocation. The value you choose is
allocated permanently to graphics and is unavailable to the operating system. For example, if you
set this value to 512M on a system with 2 GB of RAM, the system always allocates 512 MB for
graphics and the other 1.5 GB for use by the BIOS and operating system. Default is Auto which sets
memory allocation to 512 MB.
If you select Selectable UMA Size, the UMA Frame Buffer Size option displays, which lets you set the
UMA memory size allocation between 32 MB and 2 GB.
●
Internal Speaker (does not affect external speakers). Default is enabled.
●
USB Charging Port (enable/disable). Use this option to disable the USB charging port.
●
NFC Device (enable/disable). Allows yoo to enable or disable the near field communication device.
●
Integrated Audio (enable/disable). Allows you to enable or disable the onboard Audio controller.
●
Monitor Tracking (enable/disable). Allows BIOS to save monitor asset information.
PCI/VGA Configuration Displayed only if there are multiple PCI video adapters in the system. Allows you to specify which VGA
controller will be the "boot" or primary VGA controller.
NOTE: To see this entry, you must enable Integrated Video (Advanced > Device Options) and Save
Changes and Exit.
104 Chapter 6 Computer Setup (F10) Utility ENWW
To Next Page
Loading...
Need help?
General