HP EliteOne 705 G1 User Manual

4. To remove a memory module, press outward on the two latches on each side of the SODIMM (1), then
pull the SODIMM out of the socket (2).
5. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1), then
press the SODIMM down (2) so that the latches lock it in place.
NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab
on the memory socket.
The computer automatically recognizes the additional memory when you turn on the computer.
46 Chapter 5 Removal and Replacement Procedures ENWW

HP EliteOne 705 G1 Specifications

General

Brand	HP
Model	EliteOne 705 G1
Category	Desktop
Language	English