Release the full-length expansion board retainerRelease the full-length expansion board retainer
ProcedureProcedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
4. Remove the access panel ( Remove the access panel).
5. Remove the air baffle ( Removing the air baffle ).
6. Remove the air baffle diverters.
7. Install the air baffle.
8. Release the full-length expansion board retainer.
To Next Page
Loading...
