HP Enterprise ProLiant DL380 Gen10 - Front Panel LEDs and Buttons

Front panel LEDs and buttonsFront panel LEDs and buttons
SFF front panel LEDs and buttonSFF front panel LEDs and button
ItemItem DescriptionDescription StatusStatus
1 Power On/Standby button
and system power LED*
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing
power on sequence
Solid amber = System in standby
Off = No power present†
2 Health LED* Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is
rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical**
3 NIC status LED* Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network
active
Off = No network activity
4 UID button/LED* Solid blue = Activated
Flashing blue:
1 Hz/cycle per sec = Remote management or
firmware upgrade in progress
4 Hz/cycle per sec = iLO manual reboot
sequence initiated
8 Hz/cycle per sec = iLO manual reboot
sequence in progress
Off = Deactivated
*When all four LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see " Power fault
Front panel LEDs and buttons 227