Removing and replacing the HPE 800W Flex Slot Scalable Persistent Memory Power SupplyRemoving and replacing the HPE 800W Flex Slot Scalable Persistent Memory Power Supply
CAUTION: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
with either a component or a blank.
ProcedureProcedure
1. Access the product rear panel .
2. Remove the power supply.
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or
power supply blank to cool before touching it.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
