HP Enterprise ProLiant DL380 Gen10 - Removing and Replacing an SFF Standard Chassis Ear

Removing and replacing an SFF standard chassis earRemoving and replacing an SFF standard chassis ear
ProcedureProcedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
4. Remove the chassis ear.
To replace the component, reverse the removal procedure.
Removing and replacing an SFF standard chassis ear 176