Removing and replacing the FlexibleLOMRemoving and replacing the FlexibleLOM
ProcedureProcedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect the LAN segment cables.
4. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
5. Remove the FlexibleLOM.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
