Removing and replacing the hot-plug fanRemoving and replacing the hot-plug fan
ProcedureProcedure
1. Extend the server from the rack ( Extend the server from the rack ).
2. Remove the access panel ( Remove the access panel).
CAUTION: CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server in
this manner results in improper airflow and improper cooling that can lead to thermal damage.
IMPORTANT: IMPORTANT: For optimum cooling, install fans in all primary fan locations.
For more information, refer to the fan locations table in the server user guide.
3. Remove the fan.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
