1.2.9 InfiniBand adapter spare parts
1.2.10 FlexibleLOM adapter spare parts
1.2.11 System board spare parts
1.2.12 System battery spare part
1.3 Server options
1.3.1 Drive spare parts
1.3.1.1 Hot-plug drive spare parts
1.3.1.2 Solid state NVMe drive spare parts
1.3.1.3 Solid state M.2 drive spare parts
1.3.1.4 Solid state SAS drive spare parts
1.3.1.5 Solid state SATA drive spare parts
1.3.2 Fan spare parts
1.3.3 Backplane board spare parts
1.3.4 Chassis Intrusion Detection Switch spare part
1.3.5 Rear serial port interface spare part
1.3.6 Accelerator and GPU options spare parts
1.3.7 12Gb SAS Expander Card spare part
1.3.8 Energy pack spare parts
1.3.8.1 HPE Smart Storage Hybrid Capacitor spare part
1.3.8.2 HPE Smart Storage Battery spare part
1.3.9 Power module spare parts
1.3.10 LFF front I/O board spare part
1.3.11 HPE Trusted Platform Module 2.0 spare part
1.3.12 Pensando Distributed Services Platform card spare parts
1.3.13 HPE NS204i-p NVMe OS Boot Device spare parts
1.3.14 Cable spare parts
2 Customer self repair
3 Removal and replacement procedures
3.1 Required tools
3.2 Safety considerations
3.2.1 Preventing electrostatic discharge
3.2.2 Symbols on equipment
3.2.3 Server warnings and cautions
3.3 Preparation procedures
3.3.1 Power down the server
3.3.2 Extend the server from the rack
3.3.3 Remove the server from the rack
3.3.4 Access the product rear panel
3.3.4.1 Release the cable management arm
3.3.5 Accessing the Systems Insight Display
3.3.6 Remove the access panel
3.3.7 Release the full-length expansion board retainer
3.4 Removing the bezel
3.5 Removing and replacing the rack rails
To Next Page
Loading...
