HP Integrity Superdome SX1000 - Page 254

Appendix E
Replaceable Parts
242
CASTER-RGD PL 3-IN-Wheel 1492-0310
STANDOFF-HEX, 188-IN-LG .187in-A/F CRS, qty 2 installed
per D-sub connector on HUCB
0380-2057
STANDOFF-HEX, 18-MM-L, SBC to SBCH 0380-4051
STANDOFF-HEX, 16-MM-LG M3.0 x 0.5-THD SST 0380-4735
SCREW, -MACHINE ASSY, M3 X 0.5 8MM-LG, qty 6 used to
attach 48VDC/HKP brkt. Qty 14 used to attach HMIOB, qty 5
used to attach mounting brkt to UGUY, qty 6 used to attach
mounting brkt to SBCH
0515-0372
SCREW, 4.0 x 10 (for cabinet feet) 0515-0380
SCREW, Machine, MSM 3.0 x 0.5 6mm LG 0515-0430
SCREW, Machine Assembly, M4 x 0.7 45MM-LG 0515-0670
SCREW-CAP, M10 x 1.5 80MM-LG HEX-HD, Bumper foot
screw
0515-0824
SCREW, Machine, M5 x 0.8 10MM LG 0515-2991
SCREW, SMM 4.0 8 PCPNTX, frt & rr door hindge 0515-2113
SCREW, Machine, M4 x 0.7 8mm-LG 90-DEG-FLH-HD 0515-1101
SCREW, Machine, M4 x 8mm, T-15, bkpl, 48V Busbar 0515-0433
TIE-WRAP, Velcro, REO cable management 5021-1125
NUT-HEX-DBL-CHAM 12-32-THD .078-IN-THK 0535-0060
NUT, Hex W/Ext-T-LKWR M5 x 0.8 4MM-THK, qty 1 used to
attach ground lug from 48V Distribution Bus
0535-0066
INSERT-NUT, Threaded, M4 x 0.7 2MM-LG 0590-1153
INSERT-NUT, Threaded, M10.0 0590-2023
INSERT-NUT, Threaded, STDF M4.0 x 0.7 18MM-LG 0590-2555
CABLE TIE, .062-1.25dia., 1-WD NYL 1400-1154
CABLE TIE, ).87-dia .09-WD, NYL 6/6 1400-2150
SCREW, Machine assembly, 4-40, .375-LG PAN-HD-TORX,
qty 1 used to attach female guide
2200-1259
Rubber Bumper, SD front & rear doors 0403-0549
Table E-1 Superdome HP9000 and HP Integrity Superdome with PA-RISC & IPF
Processors
(Continued)
FRU DESCRIPTION
Replacement
FRU Part No.
Exchange FRU
Part No.