Chapter 2
Installing the System
Unpacking and Inspecting
30
Step 7. Remove the plastic anti-static bag by lifting it straight up off the cabinet, and check for damage. If
damaged, follow the claims procedure. Some damage can be repaired by replacing the damaged
part. If extensive damage is found, it may be necessary to repack and return the entire cabinet to
Hewlett-Packard.
Check the cabinet exterior for signs of shipping damage.
Step 1. Look at the top and sides for dents, warpage, or scratches.
Step 2. Check that the power supply mounting screws are in place and locked.
Figure 2-6Check Power Supply Mounting Screws
Power Supply
Mounting Screws
Power Supplies
To Next Page
Loading...
