Chapter 2
Installing the System
Unpacking and Inspecting
36
Repackaging:
Step 1. Assemble the Hewlett-Packard packing materials that came with the cabinet.
Step 2. Carefully roll the cabinet up the ramp.
Step 3. Attach the pallet mounting brackets to the pallet and the cabinet.
Step 4. Reattach the ramps to the pallet.
Step 5. Replace the plastic anti-static bag and foam inserts.
Step 6. Replace the cardboard surrounding the cabinet.
Step 7. Replace the cardboard caps.
Step 8. Secure the assembly to the pallet with straps.
The cabinet is now ready for shipment.
To Next Page
Loading...
