48
(11) Power supply
slot 2 (11) LINK LED for the mana
ement Ethernet port
(13) ACT LED for the management Ethernet port (14) Power supply slot 1
The HP 5930-4Slot/HP 5930-4Slot TAA switch comes with a filler panel in all interface module slots
except slot 1. You can install one to four interface modules for the switch as needed. In Figure 56, the
LSWM18QC interface modules are installed in the interface module slots. For more information about
installing and removing interface modules, see "Installing/Removing an interface module."
The HP 5930-4Slot/HP 5930-4Slot TAA switch comes with the four power supply slot empty and three
filler panels as accessories. You can install two to four power supplies for the switch as needed. In Figure
57, t
wo 650W AC power supplies are installed in the power supply slots. For more information about
installing and removing power supplies, "Installing/removing a power supply."
The HP 5930-4Slot/HP 5930-4Slot TAA switch comes with the two fan tray slots empty. You must install
two fan trays of the same model for the switch. In Figure 57, t
wo LSWM1HFANSC fan trays are installed
in the fan tray slots. For more information about installing and removing fan trays, "Installing/removing
a f
an tray."
Figure 58 Left side panel
(1) Primary
roundin
point (2) Auxiliary
roundin
point 1
Technical specifications
Table 9 Technical specifications
Item
HP 5930-32 QSFP+/HP
5930-32 QSFP+ TAA
HP
5930-2Slot+2QSFP+/HP
5930-2Slot+2QSFP+ TAA
HP 5930-4Slot/HP
5930-4Slot TAA
Dimensions (H ×
W × D)
43.6 × 440 × 660 mm
(1.72 × 17.32 × 25.98 in)
44.2 × 440 × 660 mm
(1.74 × 17.32 × 25.98 in)
88.1 × 440 × 660 mm
(3.47 × 17.32 × 25.98 in)
Weight ≤ 13 kg (28.66 lb) ≤ 16 kg (35.27 lb) ≤ 27 kg (59.52 lb)
Console ports
• 1 × USB Mini console
port
• 1 × serial console port
• 1 × USB Mini console
port
• 1 × serial console port
• 1 × USB Mini console
port
• 1 × serial console port
Management
Ethernet ports
1 1 1
USB ports 1 1 1
QSFP+ ports 32 2 N/A
Interface
module slots
N/A 2 4
1 2
To Next Page
Loading...