HP ProCurve MSM310 - LLDP Agent Context

CLI commands
LLDP agent context
2-90
LLDP agent context
Path: View > Enable > Config > LLDP agent
Use this context to configure LLDP settings for controllers and APs.
New admin-status
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
admin-status (tx_rx | txonly | rxonly | disable)
Enables LLDP agent functionality on this port.
New basic-tlv-enable
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
basic-tlv-enable
Enables support for basic TLVs.
no basic-tlv-enable
Disables support for basic TLVs.
New basic-tlv-enable port_desc
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
basic-tlv-enable port_desc
Enables the port description TLV.
no basic-tlv-enable port_desc
Disables the port description TLV.
New basic-tlv-enable system_cap
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
basic-tlv-enable system_cap
Enables the system capabilities TLV.
no basic-tlv-enable system_cap
Disables the system capabilities TLV.
New basic-tlv-enable system_descr
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
basic-tlv-enable system_descr
Enables the system description TLV.
no basic-tlv-enable system_descr
Disables the system description TLV.