HP ProCurve MSM310 - Snmp-Server Access Wireless

CLI commands
Config context
2-25
snmp-server access wireless
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server access wireless
Enables SNMP access on the wireless port.
no snmp-server access wireless
Blocks SNMP access on the wireless port.
snmp-server access port-2
Supported on: MSM320 MSM310
snmp-server access port-2
Enables SNMP access on the upstream port.
no snmp-server access port-2
Blocks SNMP access on the upstream port.
snmp-server user
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server user <name>
Creates a new SNMP user or switches to the SNMP user context with the specified user name.
no snmp-server user <name>
Deletes the specified SNMP user.
snmp-server notification receiver
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server notification receiver <host>
Creates a new SNMP notification receiver or switches to the SNMP notification receiver context
with the specified IP address.
no snmp-server notification receiver <host>
Deletes the specified SNMP notification receiver.
soap-server
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
soap-server
Enables the SOAP server.
no soap-server
Disables the SOAP server.