HP ProCurve MSM310 Reference Guide

CLI commands
Config context
2-32
(Different means older or newer. This enables you to return to a previous firmware version if
required).
Configuration settings are preserved during the update unless stated otherwise in the release
notes for the firmware. However, all active connections will be terminated. Customers will have to
log in again after the AP restarts
firmware-update start
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
firmware-update start
Upload the firmware based on a specified URI. This URI can be set with the command: firmware-
update uri.
firmware-update time
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
firmware-update time <time>
Sets the time of day the scheduled firmware upgrade will take place.
Parameters
<time> Time as hh:mm:ss. For example: 15:44:00.
firmware-update uri
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
firmware-update uri <uri>
Sets the URI where the AP will retrieve new firmware.
no firmware-update uri
Clears the firmware URI.
firmware-update weekday
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
firmware-update weekday (everyday | monday | tuesday | wednesday | thursday |
friday | saturday | sunday)
Sets the day when the scheduled firmware upgrade will take place.
snmp-server trap firmware-update
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server trap firmware-update
Send a trap on firmware update.
no snmp-server trap firmware-update
Do not send a trap on firmware update.

HP ProCurve MSM310 Specifications

General

Brand	HP
Model	ProCurve MSM310
Category	Wireless Access Point
Language	English