HP ProCurve MSM310 - Discovery Protocol

CLI commands
Config context
2-40
New lldp local-mesh
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp local-mesh
Enable LLDP support on local mesh links.
no lldp local-mesh
Disable LLDP support on local mesh links.
discovery protocol
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
discovery protocol
Enables broadcast of HP device information for interoperability with CDP-enabled networking
hardware.
no discovery protocol
Disable broadcast of HP device information.
discovery protocol device-id
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
discovery protocol device-id <name>
Overwrite the device-id field of information packets (the AP serial number is not used).
no discovery protocol device-id
Do not overwrite the device-id field of information packets (use the AP serial number).
New service controller discovery interface internet-port
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
service controller discovery interface internet-port
Allow discovery on the LAN port.
no service controller discovery interface internet-port
Allow discovery on the LAN port.
New service controller discovery interface lan-port
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
service controller discovery interface lan-port
Allow discovery on the LAN port.
no service controller discovery interface lan-port
Allow discovery on the LAN port.