HP ProCurve MSM310 - Interface Wireless

CLI commands
Config context
2-11
interface wireless
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
interface wireless <interface number>
Switches to the specified wireless interface context.
local mesh profile
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
local mesh profile <name>
Switches to the specified local mesh link context.
Parameters
<name> Number of the local mesh profile to configure.
interface gre
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
interface gre <name>
Switches to the specified GRE interface or creates a new GRE interface with the specified name.
no interface gre <name>
Deletes the specified GRE interface.
virtual ap
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
virtual ap <name>
Creates a new VSC (VAP) profile or switches to the existing VSC (VAP) context with the specified
name.
no virtual ap <name>
Deletes the specified VSC (VAP) profile.
Parameters
name Name of an existing or new VSC (VAP) profile.
cap-switch to
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
cap-switch to (ap | ac | wab)
Switches to the specified operational mode.
Parameters
ap Switches operational mode to CAP MultiService Access Point.
ac Switches operational mode to CAP MultiService Controller.
wab Switches operational mode to WAB Wireless Station.