HP ProCurve MSM310 - Snmp-Server Trap Config-Update

CLI commands
Config context
2-20
snmp-server trap config-update
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server trap config-update
Send a trap whenever the firmware is updated.
no snmp-server trap config-update
Do not send this trap.
logging destination
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
logging destination <name>
Creates a new remote destination for syslog.
no logging destination <name>
Deletes the specified syslog destination.
Parameters
<name> Name of syslog destination. Use the name "local" to edit your local log file
settings. Any other name will edit/create a remote log destination.
snmp-server trap syslog-severity
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server trap syslog-severity
Set the severity level of syslog messages that will trigger a trap.
no snmp-server trap syslog-severity
Do not send this trap.
snmp-server
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server
Enables the SNMP agent.
no snmp-server
Disables the SNMP agent.
snmp-server access port-1
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server access port-1
Enables SNMP access on the downstream port.
no snmp-server access port-1
Blocks SNMP access on the downstream port.