HP ProCurve MSM310 - Snmp-Server Version 2 C

CLI commands
Config context
2-24
snmp-server version 2c
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server version 2c
Enable support for SNMP version 2c.
no snmp-server version 2c
Disable support for SNMP version 2c.
snmp-server version 3
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server version 3
Enable support for SNMP version 3.
no snmp-server version 3
Disable support for SNMP version 3.
snmp-server access interface vlan
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server access interface vlan <name>
Enables access to SNMP via the specified VLAN.
no snmp-server access interface vlan <name>
Disables access to SNMP via the specified VLAN.
Parameters
<name> Specifies the name of the VLAN.
snmp-server access local mesh
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server access local mesh <profile>
Enables access to SNMP via the specified local mesh.
no snmp-server access local mesh <profile>
Enables access to SNMP via the specified local mesh.
snmp-server access interface gre
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server access interface gre <name>
Enables access to SNMP via the specified GRE tunnel.
no snmp-server access interface gre <name>
Removes access to SNMP via the specified GRE tunnel.