HP ProCurve MSM310 Reference Guide

CLI commands
Config context
2-42
dot1x reauth
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
dot1x reauth
Enable this option to force 802.1X client stations to reauthenticate.
no dot1x reauth
Disables 802.1X reauthentication.
dot1x reauth period
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
dot1x reauth period (15m | 30m | 1h | 2h | 4h | 8h | 12h)
Sets the 802.1X reauthentication interval. Client stations must reauthenticate when this interval
expires.
dot1x reauth terminate
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
dot1x reauth terminate
Enable this option to allow client stations to remain connected during re-authentication. Client
traffic is blocked only when re-authentication fails.
no dot1x reauth terminate
Disabled this option to block client traffic during re-authentication and only activate traffic again
if authentication succeeds.
dot1x supplicant timeout
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
dot1x supplicant timeout <number>
Sets the 802.1X supplicant time-out.
Parameters
<seconds> time-out in seconds.
dynamic key
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
dynamic key
Enables dynamic key support for 802.1X and WPA.
no dynamic key
Disables dynamic key support for 802.1X and WPA.

HP ProCurve MSM310 Specifications

General

Brand	HP
Model	ProCurve MSM310
Category	Wireless Access Point
Language	English