CLI commands
Config context
2-36
snmp-server trap unauthorized-ap interval
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server trap unauthorized-ap interval <number>
If set to 0, then traps are only sent when a rogue access point is detected. If set to >0, the entire list
of rogue access points is sent each time the interval expires.
wireless-scan
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wireless-scan
Enables wireless neighborhood scanning.
no wireless-scan
Disables wireless neighborhood scanning.
wireless-scan period
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wireless-scan period <seconds>
Specifies the interval between wireless neighborhood scans.
Parameters
<seconds> Scanning interval. Range: 10 - 600 seconds.
wireless-scan url
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wireless-scan url <location>
Sets the URL of the file that contains a list of all authorized access points.
no wireless-scan url
Deletes the URL of the file that contains a list of all authorized access points.
The format of this file is XML. Each entry in the file is composed of two items: MAC address and
SSID. Each entry should appear on a new line.
For example:
00:00:00:07:f5:11 "AP_1"
00:00:00:07:f5:23 "AP_2"
00:00:00:07:f5:12 "AP_3"
access controller shared secret
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
access controller shared secret <secret>
Sets the shared secret used to communicate with the controller.
no access controller shared secret
Sets the shared secret used to communicate with the access controller.
To Next Page
Loading...
Need help?
General
