HP ProCurve MSM310 - Authentication Server Access Controller

CLI commands
Virtual AP context
2-62
authentication server access controller
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
authentication server access controller
Use the access controller to authenticate 802.1X or WPA logins.
authentication server accounting
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
authentication server accounting
Enables RADIUS accounting for this VSC (VAP).
no authentication server accounting
Disables RADIUS accounting for this VSC (VAP).
authentication server accounting radius profile
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
authentication server accounting radius profile <name>
Sets RADIUS accounting to use the specified RADIUS profile.
no authentication server accounting radius profile
Removes accounting support for 802.1X.
authentication server radius
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
authentication server radius <name>
Sets the RADIUS profile to use for 802.1X or WPA authentication.
dot1x authentication
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
dot1x authentication (local | radius | active-directory)
Sets the authentication for 802.1X and WPA.
wpa-psk
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wpa-psk <key>
Sets the WPA preshared key.
no wpa-psk
Deletes the WPA preshared key.
Parameters
password Specify a key that is between 8 and 64 ASCII characters in length. It is
recommended that the preshared key be at least 20 characters long, and be
a mix of letters and numbers.