CLI commands
Config context
2-43
dynamic key interval
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
dynamic key interval (5m | 10m | 15m | 30m | 1h | 2h | 4h | 8h | 12h)
Specifies how often (in minutes or hours) that the group (broadcast) key is changed for 802.1X
and WPA.
add wireless ip-qos profile
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
add wireless ip-qos profile <name>
Adds the specified profile to the list of IP QoS profiles in effect for all local mesh links.
<profile-name> Name of an existing IP QoS profile.
delete wireless ip-qos profile all
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
delete wireless ip-qos profile all
Clears the list of IP QoS profiles currently in effect for all local mesh links.
delete wireless ip-qos profile
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
delete wireless ip-qos profile <name>
Removes the specified profile from the list of IP QoS profiles in effect for all local mesh links.
<profile-name> Name of an existing IP QoS profile currently in the profile list for all local
mesh links.
wireless link qos
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wireless link qos (disabled | 802.1p | wme | very-high | high | normal | low |
tos | diffsrv)
Sets the local mesh QoS policy.
sensor discovery mode
Supported on: MSM320 MSM335
sensor discovery mode (id | ip)
Sets the method the AP will use to communicate with the RF Manager Server.
Parameters
id Connect using the Server ID of the RF Manager Server.
ip Connect using the IP address or hostname of the RF Manager Server.
Description
For these methods to work, the following must be true:
To Next Page
Loading...
