HP ProCurve MSM310 - Config Context

CLI commands
Config context
2-9
Config context
Path: View > Enable > Config
This is the root context for all configuration commands.
certificate
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
certificate (authority | local) <uri> <certname> [<password>]
Adds a new certificate to the store, using the specified friendly name.
certificate binding
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
certificate binding (web-management | html-auth | soap | eap) <certname>
Assigns a certificate to a service.
no certificate binding (web-management | html-auth | soap | eap) <certname>
Unassigns a certificate from a service.
certificate revocation
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
certificate revocation <uri> <certname>
Adds a Certificate Revocation List (CRL) to an existing authority certificate.
end
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
end
Switches to parent context.
factory settings
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
factory settings
Resets the system configuration to factory default settings.
interface ethernet
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
interface ethernet (port-1|port-2)
Switches to the specified Ethernet interface context.