HP ProCurve MSM310 - Page 69

CLI commands
Config context
2-39
New lldp med-location elin-addr
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp med-location elin-addr <elin>
Sets the Emergency Call Services ELIN as described, for example, by NENA TID 07-501.
New lldp refresh-interval
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp refresh-interval <time>
Sets the interval (in seconds) at which local LLDP information is updated and TLVs are sent to
neighboring network devices.
New lldp run
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp run
Enables the LLDP Agent.
no lldp run
Disables the LLDP Agent.
New show lldp config
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
show lldp config [<port>]
Shows LLDP configuration settings.
New show lldp info local-device
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
show lldp info local-device [<port>]
Shows LLDP configuration settings.
New show lldp info remote-device
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
show lldp info remote-device [<port>]
Shows LLDP configuration settings.
New show lldp stats
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
show lldp stats [<port>]
Shows LLDP statistics for all ports or a specific port .