EasyManua.ls Logo

HP ProLiant DL320 Generation 3 - System Unit; Power Supply

HP ProLiant DL320 Generation 3
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
5-2 HP ProLiant DL320 Generation 3 Server Maintenance and Service Guide
System Unit
Table 5-1: System Unit Specifications
Item Description
Height 4.32 cm (1.70 in)
Depth 60.96 cm (24 in)
Width 42.62 cm (16.78 in)
Weight (maximum) 12.27 Kg (27 lbs)
Weight (no drives installed) 10.91 Kg (24 lbs)
U.S. and international input voltage requirements
Rated input voltage 100 VAC to 240 VAC
Rated input frequency 50 Hz to 60 Hz
Rated input current 6.0 A (110 VAC) / 3.0 A (220 VAC)
Rated input power 580 W
BTUs per hour 1990
Rated steady-state power 350 W
Temperature range
1
Operating
10 °C to 35 °C (50 °F to 95 °F)
Shipping
-40 °C to 70 °C (-40 °F to 158 °F)
Relative humidity (non-condensing)
2
Operating 10 % to 90 %
Non-operating 5 % to 95 %
Maximum wet-bulb temperature
28 °C (82.4 °F)
1
All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per
1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed.
2
Storage maximum humidity of 95 percent based on maximum temperature of 45 °C (113 °F).
Altitude minimum for storage is 70 KPa.
Power Supply
Table 5-2: Power Supply Specifications
Item Description
Input characteristics
Rated input voltage 100 VAC to 240 VAC
Rated input line 110 VAC / 220 VAC
Frequency range 50 to 60 Hz
continued

Table of Contents

Related product manuals