HP ProLiant DL320 Generation 3 - Integrated Intel ICH6 A SATA Controller; Optional Hard Drives; SATA Hard Drives

Specifications
HP ProLiant DL320 Generation 3 Server Maintenance and Service Guide 5-5
Integrated Intel ICH6A SATA Controller
Table 5-6: Intel ICH6A SATA Controller Specifications
Item Description
Simultaneous drive transfer channels 2 channels
Transfer rate synchronous (Max) 100 MBps
Data transfer method 32-bit PCI bus master
Drive support Ultra ATA, EIDE & Fast ATA-2
PCI bus transfer rate (maximum) 266 MBps
Data transfer modes UDMA Modes 5/4/3/2/1/0, DMA Modes 2/1/0,
PIO Modes 4/3/2/1/0
Protocol ATA/100 compatible
Feature CRC (Cyclical Redundancy Check)
Buffer size 128 byte
Optional Hard Drives
SATA Hard Drives
Table 5-7: SATA Hard Drive Specifications
Item Description
Formatted capacity 80,026 MB
Height Third, 2.54 cm (1.0 in)
Size 8.89 cm (3.5 in)
Interface ATA/100
Transfer rate synchronous (max) 100 MBps
Single track 0.8 ms
Average 9.0 ms
Full stroke 17.0 ms
Rotational speed 7,200 rpm
Bytes/sector 512
Logical blocks 160,086,528
Operating temperature
Celsius
5° to 55°
Fahrenheit
41° to 131°