HP ProLiant DL320 Generation 3 - Memory

Specifications
HP ProLiant DL320 Generation 3 Server Maintenance and Service Guide 5-3
Table 5-3: Power Supply Specifications continued
Item Description
Rated input power 580 W
Rated input current 6 A (110 V) to 3 A (220 V)
Output characteristics
Rated steady-state power 350 W
Maximum peak power 422 W for 15 seconds.
Ambient temperature range
Operating
10 °C to 48 °C (50 °F to 118 °F)
Non-operating
-40 °C to 70 °C (-40 °F to 158 °F)
Relative humidity (non-condensing)
Operating 5 % to 85 %
Non-operating 5 % to 95 %
Dielectric voltage withstand
Input to output 1800 VAC/second
Input to ground 1800 VAC/second
Maximum wet-bulb temperature
41.3 °C
Memory
Table 5-4: SDRAM DIMM Specifications
Item Description
Size 64 MB and 4 GB
Speed 400 MHz
Width 72 bits
Type PC3200 ECC unbuffered DDR SDRAM DIMMs
Note: DIMMs must be industry-standard 184-pin PC3200 DDR DIMMs. The DDR DIMMs must
support CAS Latency 2, or greater. They must also contain the mandatory JEDEC SPD. Use HP
supplied DIMMs only.