HP rp3440 - Ilo MP Card LAN Leds

Table 1-14 SCSI Port Pinouts (continued)
Signal DescriptionPin NumberSignal DescriptionPin Number
S39 (–DB P1)39S5 (+DB P1)5
S40 (–DB 0)40S6 (+DB 0)6
S41 (–DB 1)41S7 (+DB 1)7
S42 (–DB 2)42S8 (+DB 2)8
S43 (–DB 3)43S9 (+DB 3)9
S44 (–DB 4)44S10 (+DB 4)10
S45 (–DB 5)45S11 (+DB 5)11
S46 (–DB 6)46S12 (+DB 6)12
S47 (–DB 7)47S13 (+DB 7)13
S48 (–DB P)48S14 (+DB P)14
S4949S1515
S5050S16 (DIFFSENS)16
S51 (TERMPWR)51S17 (TERMPWR)17
S52 (TERMPWR)52S18 (TERMPWR)18
S53 (RESERVED)53S19 (RESERVED)19
S5454S2020
S55 (–ATN)55S21 (+ATN)21
S5656S2222
S57 (–BSY)57S23 (+BSY)23
S58 (–ACK)58S24 (+ACK)24
S59 (–RST)59S25 (+RST)25
S60 (–MSG)60S26 (+MSG)26
S61 (–SEL)61S27 (+SEL)27
S62 (–C/D)62S28 (+C/D)28
S63 (–REQ)63S29 (+REQ)29
S64 (–I/O)64S30 (+I/O)30
S65 (–DB 8)65S31 (+DB 8)31
S66 (–DB 9)66S32 (+DB 9)32
S67 (–DB 10)67S33 (+DB 10)33
S68 (–DB 11)68S34 (+DB 11)34
iLO MP Card LAN LEDs
The iLO MP card LAN uses an RJ-45 type connector. This connector has four LEDs that signal
status and activity.
Figure 1-16 shows the iLO MP card LAN LEDs.
Controls, Ports, and LEDs 37