Table 3-4 Setup Checklist (continued)
XActionStep
Choose one of the three methods to configure the LAN for iLO
MP access:
• DHCP with DNS
• ARP Ping
• RS-232 serial port
Configure the iLO MP LAN2
Log in to the iLO MP from a supported web browser or command
line using the default user name and password.
Log on to the iLO MP3
Change the default user name and password on the administrator
account to your predefined selections.
Change default user name and
password
4
Set up the user accounts if you are using the local accounts feature.Set up user accounts5
Set up the security access settings.Set up security access6
Advanced Setup
Activate advanced features by entering a license key.Activate Advanced Pack Features1
Setup Flowchart
Use this flowchart as a guide to assist in the iLO MP setup process.
90 Installing the System
To Next Page
Loading...
