HP StorageWorks 4400 - Remove Product from Packaging; Overview

3 Remove product from packaging
Overview
1. Remove product from boxes.
2. Verify that contents match your expectations and site requirements.
• EVA4400 controller enclosure should contain:
• One 2U controller enclosure with two HSV300 or HSV300–S controller modules, two
power supply modules, two fan modules, and two battery modules installed.
• Rack mounting hardware
• Two 2.0 meter FC copper cables
• Two power cords
• Installation documentation
• XCS controller software recovery CD
• Each FC disk shelf will contain:
• One 2U M6412 disk enclosure, two power supply modules, two fan modules, and two
battery modules.
• Rack mounting hardware kit
• Two 0.41 meter FC copper cables
• Two power cords
3. Inspect for damage.
HP StorageWorks 4400 Enterprise Virtual Array installation guide 23