HP StorageWorks 4400 Installation Guide

8 Configuring management servers using
HP SmartStart EVA Storage
NOTE:
This chapter only applies if you are connecting the EVA4400 to a management server for server-based
management. If you plan to install HP Command View EVA on the controller enclosure management
module (for array-based management), skip this chapter and go to Chapter 9. To complete arrary
configuration for array-based management, see “Completing the array configuration” in the HP
StorageWorks Command View EVA user guide .
Overview
1. Insert the HP SmartStart EVA Storage CD in the drive of the management server.
The HP SmartStart EVA Storage tool runs automatically.
2. Read the conceptual information and browse online help.
3. Click Configure as Management Server on the display.
4. Follow the prompts to configure this system as your management server.
Figure 20 Configure as management server choice
HP StorageWorks 4400 Enterprise Virtual Array installation guide 47

HP StorageWorks 4400 Specifications

General

Brand	HP
Model	StorageWorks 4400
Category	Storage
Language	English