EasyManuals Logo

HP StorageWorks 4400 Installation Guide

HP StorageWorks 4400
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
error logging is enabled.
Error count 2 Operations completed 4107
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 0 Default buffer size 512
Current preferred CPU Id 0 Fastpath 1
WWID 01000010:6005-08B4-0010-70C7-0001-2000-2E3E-0000
Host name "BRCK18" Host type, avail AlphaServer DS10 466 MHz, yes
Alternate host name "VMS24" Alt. type, avail HP rx3600 (1.59GHz/9.0MB), yes
Allocation class 1
I/O paths to device 9
Path PGA0.5000-1FE1-0027-0A38 (BRCK18), primary path.
Error count 0 Operations completed 145
Path PGA0.5000-1FE1-0027-0A3A (BRCK18).
Error count 0 Operations completed 338
Path PGA0.5000-1FE1-0027-0A3E (BRCK18).
Error count 0 Operations completed 276
Path PGA0.5000-1FE1-0027-0A3C (BRCK18).
Error count 0 Operations completed 282
Path PGB0.5000-1FE1-0027-0A39 (BRCK18).
Error count 0 Operations completed 683
Path PGB0.5000-1FE1-0027-0A3B (BRCK18).
Error count 0 Operations completed 704
Path PGB0.5000-1FE1-0027-0A3D (BRCK18).
Error count 0 Operations completed 853
Path PGB0.5000-1FE1-0027-0A3F (BRCK18), current path.
Error count 2 Operations completed 826
Path MSCP (VMS24).
Error count 0 Operations completed 0
You can also use the SHOW DEVICE DG command to display a list of all Fibre Channel disks presented
to the OpenVMS host.
NOTE:
Restarting the host system shows any newly presented virtual disks because a hardware scan is
performed as part of the startup.
If you are unable to access the virtual disk, check the following:
Check the switch zoning database.
Use HP Command View EVA to verify the host presentations.
Check the SRM console firmware on AlphaServers.
Ensure that the correct host is selected for this virtual disk and that a unique OS Unit ID is used in
HP Command View EVA.
Configuring virtual disks from the OpenVMS host
To set up disk resources under OpenVMS, initialize and mount the virtual disk resource as follows:
1. Enter the following command to initialize the virtual disk:
$ INITIALIZE name-of-virtual-disk volume-label
HP StorageWorks 4400 Enterprise Virtual Array installation guide 65

Table of Contents

Other manuals for HP StorageWorks 4400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StorageWorks 4400 and is the answer not in the manual?

HP StorageWorks 4400 Specifications

General IconGeneral
BrandHP
ModelStorageWorks 4400
CategoryStorage
LanguageEnglish

Related product manuals