About this guide
This guide describes how to install the HP StorageWorks 4400 Enterprise Virtual Array.
Intended audience
This guide is intended for users with knowledge of:
• Storage area networks
• Basic operating system commands and utilities
Prerequisites
Prerequisites for using this product include:
• A Fibre Channel switch installed in your environment
• An equipment cabinet suitable for 2U sized enclosures
• A management server running Windows for HP Command View EVA software (server-based
management)
• A management module running HP Command View EVA software (array-based management)
• A CD-ROM drive attached to either the management server or the server attached to the manage-
ment module
Related documentation
You can find the documents referenced in this guide on the Manuals page of the HP Business Support
Center website:
http://www.hp.com/support/manuals
In the Storage section, click Disk Storage Systems or Storage Software and then select your product.
HP StorageWorks 4400 Enterprise Virtual Array installation guide 9
To Next Page
Loading...
Need help?
General